Grandstream Device Configuration
STATUS
BASIC SETTINGS
ADVANCED SETTINGS
FXS PORT
FXO PORT
Configuration changed. Click Apply to save settings.
Admin Password:
(purposely not displayed for security protection)
Layer 3 QoS:
(Diff-Serv or Precedence value)
Layer 2 QoS:
802.1Q/VLAN Tag
802.1p priority value
(0-7)
802.1p priority value (NATed traffic)
(0-7)
STUN Server:
(URI or IP:port)
Keep-alive Interval:
(in seconds, default 20 seconds)
Use STUN to detect network connectivity:
No
 
Yes, total STUN response misses
to restart DHCP client(mininum=3)
Firmware Upgrade and Provisioning:
Upgrade Via
TFTP
HTTP
HTTPS
Firmware Server Path:
Config Server Path:
XML Config File Password:
HTTP/HTTPS User Name:
HTTP/HTTPS Password:
Firmware File Prefix:
Firmware File Postfix:
Config File Prefix:
Config File Postfix:
Allow DHCP Option 66 to override server:
No
Yes
Automatic Upgrade:
No
Yes, every
minutes(60-5256000).
Yes, daily at hour
(0-23).
Yes, weekly on day
(0-6).
Always Check for New Firmware at Boot up
Check New Firmware only when F/W pre/suffix changes
Always Skip the Firmware Check
Authenticate Conf File:
No
Yes (cfg file would be authenticated before acceptance if set to Yes)
Firmware Key:
(in Hexadecimal Representation)
SIP TLS Certificate:
SIP TLS Private Key:
SIP TLS Private Key Password:
ACS URL:
ACS Username:
ACS Password:
Periodic Inform Enable:
No
Yes
Periodic Inform Interval:
Conncetion Request Username:
Connection Request Password:
Connection Request Port:
CPE SSL Certificate:
CPE SSL Private Key:
System Ring Cadence:
(Syntax: c=on1/off1-on2/off2-on3/off3;)
Call Progress Tones:
Dial Tone:
Ringback Tone:
Busy Tone:
Reorder Tone:
Confirmation Tone:
Call Waiting Tone:
Prompt Tone:
(Syntax:
f1=
freq@vol
[,f2=
freq@vol
[,c=
on1
/
off1
[-
on2
/
off2
[-
on3
/
off3
]]]]);
(Note: freq: 0 - 4000Hz; vol: -30 - 0dBm; Cadence on and off are in milliseconds)
Prompt Tone Access Code:
(Key pattern to get Prompt Tone. Maximum 20 digits. No default.)
Lock Keypad Update:
No
Yes (configuration update via keypad is disabled if set to Yes)
Disable Voice Prompt:
No
Yes (voice prompt is disabled if set to Yes)
Disable Direct IP Call:
No
Yes (direct IP call is disabled if set to Yes)
Life Line Mode:
Auto
Always Disconnected
Always Connected
NTP Server:
(URI or IP address)
NTP Update Interval:
minutes( 5-1440 )
Syslog Server:
Syslog Level:
DEBUG
INFO
WARNING
ERROR
NONE
Send SIP Log:
No
Yes
Download Device Configuration:
All Rights Reserved Grandstream Networks, Inc. 2006-2012